1.Click the Task button. Click in the area of the graphic where you would look to find the PCI hardware path information for the PCI-X to PCI-X bridge on the LAN/SCSI board of an rx7620 server.Hotspot question. Click on the correct location or locations in the exhibit.Correct Answers:2.Click the Task button.  Using drag and drop, place the devices in the correct order for the I/O pathing numbering scheme of an rx7620 server.Drag and drop question. Drag the items to the proper locations.Correct Answers:3.Click the Task button.  Using drag and drop, move the path components to the appropriate location in a hardware path for an rx7620 server.Drag and drop question. Drag the items to the proper locations.Correct Answers:4.A customer bought an rx7620 server with two cells installed. What is the minimum number of echelons that need to be installed on each cell? A: one on cell 0 and one on cell 1B: two on cell 0 and one on cell 1C: two on cell 0 and two on cell 1D: one on cell 0 and two on cell 1Correct Answers:  A 5.After changing some HP-UX kernel parameters your system fails to boot. What is the correct method to boot from the previous kernel? A: There is no way to boot HP-UX from the previous kernel; you need to reinstall the OS.B: Boot from primary boot disk, interrupt the boot process and then "boot backup."C: Boot from primary boot disk, interrupt the boot process and then "boot previous."D: Boot from the recovery CD and then restore the original kernel from the last ignite backup.Correct Answers:  B 6.On an rx8620 server, you want to install Windows Server 2003 on a Smart Array 64xx. During the first step of the Windows installation, the installer asks if you want to install special drivers for your SmartArray 64xx by using a floppy disk. How do you manage this? A: Instead of using a floppy disk, you will need to burn a CD with the same functionality.B: You have to create an "Unattended installation" which contains the appropriate drivers.C: By using the Smart Setup Media (SSM), the SSM will create a virtual floppy containing the drivers.D: You have to connect an external USB floppy drive and then mount the appropriate disk.Correct Answers:  C 7.Which statements are true regarding memory configurations for the rx7620 server? Select TWO. A:A minimum of two DIMMs are required per cell.B:A minimum of four DIMMs are required per cell.C:DIMM additions must be in sets of four per cell.D:For a 2-cell system, the maximum quantity of DIMMs is 32.E:For a 4-cell system, the maximum quantity of DIMMs is 64.Correct Answers:  A, D 8.A customer needs to install one new cell on an rx8620 server with three hard partitions. What is correct way to install it? A: Shutdown the cabinet and then plug in the new cell.B: Shutdown all partitions and then plug in the new cell.C: Plug in the new cell and then configure the hard partition.D: Configure a new hard partition and then plug in the new cell.Correct Answers:  C 9.What is the maximum number of PCI boards including Core I/O that can be installed on a dual cell configuration in an rx7620 server? A: 12B: 14C: 15D: 16Correct Answers:  D 10.On an rx7620 server, the master MP failed and switched to the slave MP. What is the recommended procedure to replace the master MP? A: Replace the master MP online, check/update the firmware, and force a master/slave failover from the slave MP.B: Move the slave MP to the master position, install the new MP card in the slave position, check/update the MP firmware, and power on the cabinet.C: Shut down the partition consisting of cell 1, replace the master MP, check/update the MP firmware, and force a master/slave failover on the slave MP.D: Shut down the OS on all partitions, power off the 48V and remove the AC, replace the master MP, reconnect the AC, check/update the MP firmware, and power on the cabinet.Correct Answers:  C