1.Click the Task button. In a Kerberos Ticket Exchange, three exchanges are involved when the client initially accesses a server resource.  As shown in the diagram, label each of the three exchanges.Drag and drop question. Drag the items to the proper locations.Correct Answers:2.Click the Task button. You are looking at the symdg list output from an SRDF Active/Passive R2 Celerra.  Match the Device Groups with the kind of volumes they contain.Drag and drop question. Drag the items to the proper locations.Correct Answers:3.Your customer will be adding an ATA shelf to their NS700 (NAS v5.4). You suggest that they configure the shelf with Raid3 groups. Which shelf configuration is a valid option?Hotspot question. Click on the correct location or locations in the exhibit.Correct Answers:4.Your customer has implemented HighRoad and they are having performance problems. What could be the cause? A: Nolock locking policy is set for HighRoadB: Customer's application uses large file transfersC: They configured a 32KB stripe size with SymmetrixD: Maximum number of HighRoad threads are less then 128Correct Answers:  C 5.Your customer has a Windows NT domain environment and a Celerra (v5.1). The customer would like to upgrade this domain to Windows 2003 and use SMB Signing. What should be done on the Celerra side? A: Change the cifs.smbsigning parameter to 0 and reboot the Data MoverB: Upgrade the NAS Code to version 5.4, which is the only one that supports SMB SigningC: Upgrade the NAS Code to version 5.2 or higher which supports the SMB Signing by defaultD: Change the cifs.smbsigning parameter to 0, reboot the Data Mover and configure the new Windows clients login script to use SMB SigningCorrect Answers:  C 6.Which two [2] network protocols does the Celerra support? A: ARP and RIPB: RIP and OSPFC: PAgP and ARPD: ARP and OSPFCorrect Answers:  A 7.During an iSCSI install you installed the Microsoft Initiator, Configured iSCSI targets, iSCSI LUNs and completed the masking. You go into the Initiator, you can see the target and log-in but you can not see any LUNs. What could be the problem? A: CIFS service is not startedB: Initiator iqn is not registeredC: Zoning on the switch is incorrectD: iSCSI service is not started on CelerraCorrect Answers:  B 8.You would like to run Celerra Replicator on one of your production file systems. You found from watching the last incremental backup that you have a change rate of 2% a day on that file system. The file system size is 100 GB. You want to calculate the size of the SavVol to be able to continue with replication even if you have a 4 day network outage between the source and destination site. What size must the SavVol be to accommodate the changes? A: 400 MBB: 800 MBC: 4 GBD: 8 GBCorrect Answers:  D 9.The customer is reporting many Kerberos credential error messages in the server log file for server_4. They are using NAS v.5.4. What should be done to get new credentials? A: Delete cred fileB: Flush the ccacheC: Delete Kerberos cache fileD: Delete Kerberos configurationCorrect Answers:  B 10.Click the Exhibit button.  The GGG Corporation is using SRDF/A and had to failover to the second site. There are NS700G's installed on both sites. Your colleagues issued the command to perform a restore.  What should be done next?A: Enter the command nasmcd/sbin/nas_rdf -initB: Enter the command nasmcd/sbin/nas_rdf -restoreC: Stop the NAS service; enter the command  nasmcd/sbin/nas_rdf -restoreD: Stop the NAS service as root; enter the command nasmcd/sbin/nas_rdf -restoreCorrect Answers:  D